Understand the laboratory water purifier, starting from its characteristics and principles

      The laboratory water purifier is suitable for general chemical laboratory applications such as atomic absorption spectroscopy, atomic emission spectroscopy, high performance liquid chromatography, ion chromatography, mass spectrometry, ICP plasma emission spectroscopy, etc., as well as general chemical laboratory applications such as configuration and dilution of analytical reagents. Pure water and ultrapure water used in industries such as precision optical lenses and photosensitive film processing. In order to allow users to better understand the laboratory water purifier, let's take a closer look at its performance characteristics and technical principles.

The performance characteristics of laboratory water purifier:

1. Microcomputer control, touch button, one-button operation.

2. Equipped with Exceed motherboard, humanized design, with man-machine dialogue function.

4. Automatic/manual flushing maintenance pretreatment and R.O system, automatic alarm and shutdown when the system is short of water.

5. Ultra-purification column replacement reminder, manual and automatic cycle sterilization, and constant detection of the working state of the ultraviolet lamp.

6. The brand-new quick-plug connector makes the replacement and maintenance of the filter column more convenient; there is an independent R&D department and quality inspection department, and a complete quality management system.

7. It can be set from 0 to 999 minutes, with regular and quantitative water intake, password protection, automatic liquid level control (with PE water tank), high quality accessories, low price and low operating cost.

8. There are 3 kinds of RO membrane anti-scaling timer 30-second flushing program with power-on, water shortage reset and accumulative water production for 2 hours.

9. The equipment system has the functions of water leakage detection, alarm and display.

10. The system has the function of fault monitoring and indication, which can automatically detect and repair various error programs of the host microcomputer control system.

11. It has the functions of power-on self-test, water shortage protection alarm, automatic reset after power failure, automatic shutdown when the pure water bucket is full of water, ultra-low pressure protection, and RO automatic flushing.

12. Unique intelligent true color large-screen LCD display and advanced multi-line display system, all operating conditions are clear and clear, and the operation control is simple and easy.

13. The equipment has built-in RO membrane anti-scaling and regular automatic flushing function, which effectively prolongs the service life of RO membrane. It has power-on self-check, water shortage protection alarm, automatic reset after power failure, and ultra-low voltage protection.

The principle of laboratory water purifier:

The tap water passes through the action of precision filter and activated carbon filter element to remove large particles in the water and odors in the adsorbed water. The obtained water goes through the pretreatment unit to remove most of the impurities in the water, and then uses the reverse osmosis unit to purify and desalt the water. , the obtained pure water is purified by a post-purification unit to obtain high-quality pure water. In order to avoid secondary pollution caused by the contact between the obtained pure water and the air, the obtained pure water will flow directly into the water storage tank.

The above are the technical characteristics and principles of the laboratory water purifier, I hope to help you better understand the equipment.