The excellent performance of laboratory microbial wastewater treatment equipment stems from its advanced technology

       With the rapid improvement of automation, wastewater treatment has gradually begun to use automated equipment, and as people pay more and more attention to wastewater treatment equipment, there are more and more types of wastewater treatment equipment, among which laboratory microbial wastewater treatment equipment is mainly used in microbiology. , wastewater treatment equipment for biomedicine, biochemistry, animal experiments, etc. And the operation of the equipment must ensure personal safety, environmental safety, waste safety and sample safety, and also provide a comfortable and good working environment for laboratory staff. The wide application of this wastewater treatment equipment is due to its excellent performance, and the excellent performance is due to its advanced technology. Let's take a closer look at the technical process of laboratory microbial wastewater treatment equipment.

1. New septic tank

Process flow: Separation tank — Corruption tank — Acidification tank — Oxidation tank — Discharge

The process has no power, low energy consumption, small footprint and good effluent quality. However, the septic tank has disadvantages such as difficulty in cleaning, production of foul gas and blockage of pipes.

It is recommended to replace the septic tank with a grit grit chamber to remove large debris and prevent clogging.

2. Anaerobic biological filter

The anaerobic biological filter is a sealed pool, the filler is placed in the pool, the sewage enters from the bottom of the pool and is discharged from the top of the pool. The process has low energy consumption, simple operation, strong processing capacity, and a high concentration of microorganisms can be maintained in the filter tank, and no additional mud-water separation equipment is required.

3. Composite anaerobic treatment technology

The composite anaerobic treatment technology combines the advantages of the anaerobic sludge bed reactor. This technology has good treatment effect, low energy consumption, low operating cost and convenient operation and management.

4. Biological contact oxidation tank

Biological contact oxidation tank is a kind of biofilm method. In this technology, the sewage is immersed in all the fillers. During the three-phase contact process of oxygen, sewage and fillers, pollutants are removed through the biofilm attached to the fillers.

5. Activated sludge technology

Activated sludge technology is a biological method. Air is introduced into the wastewater to make aerobic microorganisms multiply and cultivate to form activated sludge with strong adsorption capacity.