See here for the use strategy of ultrapure water machine in high temperature days!

      The hot weather in summer has a certain impact on the operation of the equipment, and the same is true for the ultrapure water machine. In order to ensure its normal operation in summer, let's talk about the following points when the ultrapure water machine runs in high temperature days in summer:

1. Avoid direct sunlight

In recent years, the average temperature in summer has been getting higher and higher, reaching 40°C in some areas. Most of the parts in the laboratory ultrapure water machine are made of food-grade materials, and the actual effect of resisting temperature is not very good. Long-term exposure to the sun will lead to problems such as the growth of bacteria in the pipeline. When installing, you need to pay attention to prevent sunlight.

2. The installation environment is air-conditioned

High temperature is very easy to cause the variation of some elements in the water body. Consumables such as grinding and polishing epoxy resin in the ultrapure water machine will endanger the service life under high temperature conditions. Under the condition of high temperature, the parts in the ultrapure water machine are very easy to be embrittled, which leads to the common failure that the ultrapure water machine cannot operate normally.

3. Close the water inlet valve and power supply

After connecting the water inlet valve and power supply, the ultrapure water machine will run. Although the water flow is not easy to seep again after the water storage tank is full, the internal switching power supply of the water purifier and the commodity circulation of water resources are still in operation, which is very harmful to the service life of the equipment for a long time. In the case of not being used, it is suggested that customers can turn off the seepage gate valve and switching power supply, which will be very helpful for future applications.

4. It is not necessary to take some measures for a long time

Because of the high temperature in summer, there is more precipitation in some areas, and the gas is wet and cold, which is very easy to grow germs. The inside of the pipe of the water purifier is likely to be damaged in summer, so there is no need to start it every 2-3 days under standard conditions for a long time, and the drainage pipe will take 3-5 minutes. In this way, the water purifier can be cleaned on time to prevent the growth of bacteria and improve the quality of the water produced.

5. Pre-treatment of the machine Regularly replace the pre-treatment of the pure water machine

It can reasonably remove all kinds of particulate residues in the filtered liquid. This part of the filter element will reduce the success rate of water after a period of application, and this part is also part of the bacteria that are easy to grow. Therefore, replacing the external pre-filtering consumables on time can not only improve the water body, but also increase the service life of the water purifier.