Get these installation common sense, refuse to be a laboratory water purifier!

      With the continuous development of science and technology and the progress of human beings, the choice of laboratory equipment is becoming more and more demanding, and laboratory water purifiers are gradually accepted by the public. In order to make it effective, any installation step is very important, let's talk about it in detail below.

Common sense of installation of laboratory water purifier:

1. Choose the right installation location: The laboratory ultrapure water machine is generally installed in an important location in the laboratory or near the experimental bench, because these two places are convenient for water intake.

2. Tools to be installed: Prepare a roll of white tape for the sealing connection of pipe joints. Common tools such as screwdrivers, electric pencils, and wrenches are also essential.

3. Punch holes in the selected place, close the main water gate, connect the water pipe to the ultra-pure water device, and wrap the interface with white tape to seal the interface to prevent water leakage.

4. Select the discharge port of concentrated water, generally the sewage outlet can be selected, but the pipeline of the discharge port of concentrated water should be directly placed in the sewage outlet to avoid backflow. Generally speaking, the port should have a certain space.

5. Connect the purified water outlet and the purified faucet and install the faucet, and also use white tape to seal the wrapping excuse.

6. Open the main tap water gate and the main water inlet ball valve, and debug the ultrapure water machine system to see if there is water leakage. If there is no abnormality, the installation is successful.

The above is the common sense of the installation of laboratory water purifiers, and in addition to selecting the right model and selecting the equipment of good quality, the correct installation steps and scientific operation are the prerequisites to ensure the normal operation of the equipment and prolong the service life. Therefore, the equipment must be installed according to the correct steps.