If the filter element in the laboratory water purifier is not replaced for a long time, it will lead to adverse results

       The laboratory water purifier is widely used. It is mainly applicable to the laboratories of testing centers, scientific research institutes, colleges and universities, hospitals and enterprises to provide the required water for analysis and testing, reagents, experiments and analytical instruments. The long-term use of the filter element of the laboratory water purifier will cause secondary pollution, so we must clean or replace the filter element in time, so as to give better play to the function of the ultra pure water machine and produce ultra pure water with better water quality. Long term use without replacing the filter element will result in two results: 1. The filter element is blocked and the water flow becomes smaller; 2. The filter aperture is too large, and the pollutants in the water are not intercepted, so it can not play the role of filtration. After a long time, it will lead to a series of adverse results:

1. Overload operation

Now the products are basically filtered step by step. If the primary filter element - PP cotton is blocked, the sediment, rust and other large particle impurities in the water will follow the raw water and directly enter the secondary filter element - activated carbon. It is necessary for the activated carbon that is not used to filter large particle impurities to bear this external burden. Overload operation will quickly shorten its life. Just because of the bad habit of replacing the filter element from time to time, users need to bear the double-layer cost of two filter elements, or even more.

2. The filtering effect of the filter element is weakened

The blocked filter element will not only reduce the outlet flow, but also weaken the filtering effect, resulting in the decrease of the "purity" of the purified water.

3. Progressive damage & mdash& mdash; Operating life of laboratory water purifier

The above is the bad result caused by not replacing the filter element of the laboratory water purifier for a long time. Therefore, the user needs to replace the filter element after using it for a certain time, so as to ensure its subsequent normal use.