Enterprise dynamicsNEWS CENTER

Provide a complete set of equipment and solutions for the laboratory

Index  >  News Center  >   Enterprise dynamics   >  Are you still troubled by water seepage in the laboratory pure water system?

Are you still troubled by water seepage in the laboratory pure water system?

Release time:2021-06-01    Views:1509

     During the use of the laboratory pure water system, water seepage occurs occasionally, which is a headache for many users. Generally, the seepage of laboratory pure water system can be summarized as the following reasons:

1. The accessories are installed incorrectly

The equipment is composed of many parts. If there is water seepage, there is a high probability that there is a problem in the assembly of the parts. At this time, the parts of the ultrapure water machine are generally re-arranged and assembled according to the instructions.

2. The rubber ring on the filter housing is not installed properly

The water seepage of the equipment may be caused by the fact that the rubber ring on the filter housing is not installed properly, and the connection of the filter housing is insufficient and inseparable, which leads to the problem of water seepage. At this time, look for the rubber ring, and fix it to the filter housing socket, and then install the filter housing.

3. The water pipe is not plugged in properly or leaks

If there is water seepage inside the equipment, you can check whether the connection between the water pipe and the connector is tight. If there is a problem here, generally add a pipe cutter to cut off the top of the water pipe head flush, and then connect it to the top of the connector, and drive a few more back to prevent water seepage.

4. The quality of the shell of the laboratory pure water system is too poor, resulting in rupture and water leakage

This situation is mainly because the outer shell of the laboratory ultrapure water machine is made of inferior materials, which cannot withstand the influence of climate and environment, and cracks appear on the surface.

2. Another situation is that the laboratory ultrapure water machine needs to replace the filter element after using it for a period of time. It is normal for water leakage at this time, so there is no need to worry. Just replace a new filter element for the laboratory ultrapure water machine.

After the laboratory pure water system leaks, the power supply and water source should be turned off immediately to avoid accidents and unnecessary losses. When you can't solve it yourself, call the after-sales personnel to repair it.

The above are the reasons and solutions for water seepage in the laboratory pure water system, I hope to help you make better use of this equipment.

WeChat official account

copyright © 2022 Nanjing Yipu Yida Technology Development Co., Ltd Al Rights Reseved    Record number:苏ICP备19073731号-1    Sitemap.xml    Manage login    technical support:Chemical Industry Instrument Website