Do these maintenance work well to make the fully automatic water purifier play a greater role

     As a kind of water treatment equipment, the automatic water purifier has a wide range of applications due to its continuous innovation and development. And the complete automatic pure water treatment equipment should be composed of the following components: EDI membrane block, rectifier power supply, flowmeter, resistivity meter, pressure gauge, PLC control box, power supply control instrument, connecting pipeline, valve, grounding protection connection line . In order to reduce the frequency of failure of the equipment and prolong its service life, regular maintenance is very important. Let's talk about it in detail.

Maintenance skills of automatic pure water machine:

1. Do not move at will after installation. When some users use the product, they move the device wherever they need water. The product will not run out of water normally after moving the product a few times. This is because the accessories inside the device are linked through joints. Frequent movement may cause damage to the device. It will cause damage to the internal parts of the water purifier, so that the machine cannot run.

2. After installation, it needs to be cleaned more. Before using the device, it is recommended that users turn on the faucet and clean for ten minutes. Use a TDS pen to test the water quality standard before use. After using for a period of time, if the water from the water purifier starts to become cloudy, stop the machine, and then open the filter housing of the equipment. At this time, you will see that the filter element in the filter housing is dirty, clean it and install it, and then turn on the machine to continue. use.

3. The service life of the filter element and the reverse osmosis membrane is different and needs to be replaced. There are multi-stage filter elements and reverse osmosis membranes in the water purifier, and the service life of the filter elements and reverse osmosis membranes is different. The service life of the filter element is between 3-12 months, while the service life of the reverse osmosis membrane is about 1-2 years. If the user finds that the produced water is becoming more and more turbid during use, but the filter element or reverse osmosis membrane is still the same after cleaning, it is necessary to replace the filter element or reverse osmosis membrane.

4. Do not deliberately alter the machine. The daily water purification volume of the equipment is directly related to the configured pressure bucket. The water stored in the pressure bucket is used for purification. In the process of using the product, you must be careful not to overdo it, and do not deliberately change the machine because you feel that the water output is too small.

5. Rest the device when not in use. The water purifier has been in working state after use. When we do not need the machine to purify water for a long time, it is recommended to turn off the power supply, close the water inlet valve, and let the product rest. This is very beneficial to the machine and can prolong the service time of the machine.

6. Replace hardware in time. The water purifier has many hardware accessories, such as faucets, pipe joints, etc. If you find water leakage or raw embroidery, please replace them with new accessories in time.

In general, there is no difficulty in using the fully automatic water purifier. We just need to turn on the switch of the equipment and start working. However, since this product is a very sensitive instrument, regular maintenance cannot be ignored.