Laboratory pure water systems have these features

The laboratory pure water system has a complete purification unit, which realizes tap water as the inlet water, and pure water and pure water as the outlet water. Produce different standards of water to meet the water needs of various laboratories. The amount of water produced per unit of pure water is 40 times that of similar imported products, and the cost of producing water is one-fifth that of other products. If the raw water quality is less than 2000μs and the hardness is less than or equal to 450ppm, in this case, the quality of the product water can be guaranteed to be stable below 5μs/cm, and the raw water utilization rate can reach 60%-80%

Users can store and query data in real time through the fully intelligent monitoring system, and then do trend analysis. The full intelligent monitoring system supports multi-language mode, multi-user use, and records data separately. Reasonable placement of consumables in the purification unit and plug-and-play of components make calibration, maintenance, cleaning, disinfection, and sampling easier in system validation.

Control function: automatic touch screen display controller, animated flow chart, real-time display and monitoring of the process operation status of each water treatment unit;

Automatic flushing pipe network function: regularly clean the pipeline to keep the inside of the pipeline clean. When the pipeline is flushed, it can be discharged directly, or it can be returned to the main machine of the water making equipment for reuse, so as to save the water source;

Online display of operating status and parameters: online display of flow, online display of pressure, online monitoring and digital display of source water quality and product water quality, etc., real-time understanding of equipment operation, and convenient monitoring and analysis of laboratory pure water system operation status;

The reverse osmosis host has the function of RO membrane anti-scaling program design: regular cycle flushing of the RO membrane surface, effectively protecting the RO membrane operation;

Fully automatic control of the liquid level of all water tanks: the equipment connection between the intermediate water tank, pure water tank and water tank not only realizes linkage, but also protects each pump from idling and damage;

On-line monitoring of product water quality and unqualified water circulation treatment: In order to ensure that the water quality of the water point meets the requirements, the water quality of the host product is monitored online in real time, and a water quality feedback device is installed to recycle and reprocess the unqualified water quality;

With automatic protection and alarm functions: power-on self-test, water shortage protection alarm, automatic reset after power failure, automatic shutdown protection and processing of high and low voltage, system linkage, if there is a problem in the system, the system will automatically shut down, etc.