Remember! When using the medical ultrapure water machine in winter, you need to pay attention to these

       With the advent of winter, the temperature in various places continues to drop, especially in the northern region, the temperature has dropped below zero. In this case, the use of medical ultrapure water machines will also be affected. Therefore, there are many places to pay attention to when using, and paying attention to this can ensure that the equipment can also play the expected effect in winter.

It is recommended to install indoors to ensure that the room temperature should not be lower than 0 degrees. Since the volume of water will expand during the solidification process, if the water remaining in the machine pipeline and filter element freezes, the pipeline, filter bottle, membrane shell, etc. of the ultrapure water machine will directly burst, resulting in water leakage.

When the water is stopped, it is recommended to turn off the water source and power supply of the medical ultrapure water machine. After the water supply is normal, turn on the tap water for a while, rinse the rust, sediment and other debris in the tap water pipe, and then turn on the water source and power supply of the ultrapure water machine. , to prevent the debris in the tap water pipe that just passed the water from clogging the filter element of the ultrapure water machine. If the ultra-pure water machine has been frozen under special circumstances, the whole ultra-pure water machine must be installed and placed in a room with a room temperature higher than 10 °C for natural thawing for more than 48 hours, to ensure that the frozen ice is completely melted before it can continue to be turned on for use. During this period Do not turn on the water forcibly.

In addition, the water production of the equipment will decrease in winter. If the water production can meet the needs, there is no need to adjust it. If it cannot meet the needs, you can close the concentrated water control valve to increase the water production, but the high-pressure water must not be higher than 0.6 Mpa to prevent damage to the machine.

The above are the main points that need to be paid attention to when the medical ultrapure water machine is used in winter. Paying attention to it can prevent the problems of pure water equipment to a certain extent and prolong the service life of the equipment.